Skip to content

Facing home insurance non-renewal because of knob and tube in Alameda or Contra Costa County? We provide certified inspection letters and turnkey replacement. How the insurance letter works

Ally Electric and Solar Inc.

Is knob and tube wiring safe?

By Ally Electric & Solar, family-owned in Richmond since 2002

Short answer

Knob and tube in good, untouched condition isn't automatically dangerous, but it's now 80 to 100 years old in most homes. It has no ground wire, its insulation gets brittle, and it overheats when buried in attic insulation or extended by later remodels. That's why insurers treat it as a risk and why most homeowners eventually replace it.

Knob and tube was a sound system when it was installed. The trouble is what a century of age, insulation and remodeling has done to it since.

What makes it risky today

No ground. Knob and tube has two wires and no ground, so it can't safely serve three-prong outlets or modern electronics without added protection.

Aging insulation. The cloth and rubber insulation becomes brittle and can crack when disturbed, especially in hot attics.

Buried in insulation. It was designed to cool in open air. The electrical code doesn't allow it in spaces where it's surrounded by thermal insulation, which describes many East Bay attics after energy upgrades.

Later modifications. Decades of added outlets, splices and overfused circuits are often more dangerous than the original wiring.

Does it have to be removed?

There's no statewide law requiring existing knob and tube to come out. In practice, insurers, home sales and remodels that open walls are what force the decision.

What to do until it's replaced

Don't overload circuits or replace fuses with larger ones. Don't add insulation over live knob and tube. Watch for warm outlets, flickering, or a burning smell, and call an electrician right away if you notice any of them.

Have an electrician map which circuits are still live. Some homes have far less active knob and tube than the inspection report suggests.

Common questions

Can I add GFCI outlets to knob and tube?

GFCI protection can make ungrounded outlets safer against shock and is one code-allowed way to install three-prong outlets on ungrounded circuits, labeled accordingly. It doesn't add a ground or fix aging insulation.

How do I know if my house has knob and tube?

Look in an unfinished attic or basement for single wires running on white ceramic knobs and through ceramic tubes in the framing. Homes built before about 1950 are the most likely to have it. An electrician can confirm whether it's still live.